COB Series LED COB Strip Light is built to produce a smooth, seamless line of light and withstand wet locations. Chip-on-board technology has a higher density of LEDs, for a more intense, uniform light that reduces heat buildup. The superior design will not show visible dots or hot spots, making it ideal for reflective surfaces such as granite countertops and tile floors. With no need for additional diffusers, the low profile strip can illuminate more narrow applications. The protective silicone sleeve allows the strip to be installed in areas exposed to splashes or sprays of water. Improved flexibility can wrap light along edges and curved surfaces.

Also available with IP20 rating for indoor application.

Applications and Use:

• These strips are installed in a wide variety of applications including: 
• High brightness lighting
• High-output custom lighting fixtures
• Manufacturing areas
• Signage and advertising
• Exteriors (protected from elements)
• Horticulture and botany
• OEM applications
• Indirect cove lighting
• Edge lighting

Product Details:

• Peel-and-stick adhesive backing simplifies mounting
• Max Run: 16.4ft (5m)
• Strip Width: 8mm (10mm with silicone sleeve)
• 0-100% dimmable
• 180° beam angle
• New COB Packing technology in the flexible PCB
• Dot free without cover
• Connection: 5.5mm x 2.1mm female barrel connector
• Includes male pigtail adaptor with 22 AWG pigtail
• Cuttable segment length: 2.45in (62.5mm)
• IP65 rated for wet conditions
• 30000 hours L70 lifespan
• UL Listed
• 5 year warranty

Available Colors (CCTs):

Specifications
CRI:     90+
Certifications/Compliance:    RoHS Compliant, UL Listed, Waterproof IP65
Current Draw:     2.08 A (total)
Current Draw Per Foot:    127mA
Dimmable:    Yes
Environmental Rating:     Weatherproof IP65
Input Connection Type:    Water Resistant Connector
LED Beam Angle:     180°
LED Density:     156 LEDs/ft.
LED Quantity:    2560 LEDs
LED Type:    COB (chip-on-board)
LEDs per Segment:    32
Length:    16.4ft (5m)
Max Run:     Up to 16.4ft (5m)
Minimum Cut Length:    62.5mm (2.46in)
Operating Temperature:    -20~+40 °C (-4~+104 °F)
Operating Voltage:     24 VDC
Power Consumption:    50 Watts
Rated Life (L70):    30000 Hours
Strip Width:    10mm (0.39in)
Type:    Flexible Light Strips
Wattage per Foot:    3.05 W/ft (10 W/m)
Wire Length:    508mm (20in)
Package Weight: 8.2oz (0.23kg)
Package Dimensions: 9.25" (23cm) x 8.25" (21cm) x 1" (3cm)
All specifications are subject to change without notice.

COB Series Strip: Our COB series uses advanced LED design to produce strip lights with a seamless, dot-free line of light. Chip-on-board technology allows for a higher density of LEDs, for a more intense and uniform illumination that reduces heat buildup. With no need for additional diffusers, and a narrow 8mm width, these strips can fit in applications with low clearance.

What is the difference between 12V and 24V strip lights?
12 volt and 24 volt strips are extremely similar. They look the same, are capable of the same light output, and have identical costs. There are some key differences between the two which matter depending on application. For instance 12 volt strips can be connected directly to your vehicle's 12 volt electrical system. While 24 volt strips on the other hand allow for longer runs, or higher densities of LEDs over their 12 volt counterparts. For the maximum run of a strip see Max Run in the specification table for more information.

How bright is the strip? What are lumens and how many do I need?
Lumens are the measure of how bright an LED strip will be when in use. The higher the lumen rating, the brighter the strip will be. Higher lumen strips are usually better for under cabinet and task lighting. Lower lumen strips are typically used for accent lighting applications.

What is color temperature? Which one is best?
Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. Natural and cool white are considered ideal for task lighting.